Jewelry Investments Industrial Investments Dental Plasters Artist Investments Material Safety Mixing Guides Distributors Contact Info Home


ICS-JEWEL CAST
 

ICS JEWEL CAST is a new formula that ICS has developed for casting gemstones that have been pre set in wax patterns.

ICS JEWEL CAST has proprietary additives that help to protect DIAMONDS and other suitable gemstones during the burnout and pouring phase of the casting process.

ICS JEWEL CAST is used for Gold and other nonferrous alloys.

  • Special care must be taken when casting with Diamonds, the molds should be allowed to cool to room temperature after casting and should not be quenched in water to avoid thermal shock to the preset gems.

Quality & Consistency - Every single batch of ICS JEWEL CAST is tested for chemical and physical properties to assure that the quality is consistent.

Special care must be taken when casting with diamonds preset in wax.

ICS JEWEL CAST has the same low rise and smooth surface finish obtainable with the ICS-PREMIUM investment.

ICS does not accept any responsibility for lost or damaged stones.

THERMAL EXPANSION
TYPICAL WORKING CHARACTERISICS


 

Water/Powder ratio 38:100

Minimum working time 9 minutes

Vacuum rise 1 1/2" to 2 3/4"

 
 
 
 


WARNING: ALL ICS JEWELRY INVESTMENT PRODUCTS CONTAIN SILICA & CRISTOBALITE. DO NOT BREATH THE DUST, BREATHING CRISTOBALITE OR SILICA DUST CAN CAUSE RESPIRATORY DISEASES. SEE MATERIAL SAFETY DATA SHEET FOR DETAILED INFROMATION.